NOTEDrives with BitLocker Drive Encryption cannot be moved by using this technique. BitLocker Drive Encryption wraps drives in a protected seal so that any offline tampering is detected and results in the disk being unavailable until an administrator unlocks it.. 1.Press and hold or right-click one of the volumes in the mirrored set, and then tap or click Break Mirrored Volume.. /I— NTFS only. It performs a minimum check of index entries.. NOTEWindows Server 2012 R2 automatically performs cyclic pickup defragmentation. With this feature, when a scheduled defragmentation pass is stopped and rerun, the computer automatically picks up where it left off or starts with the next unfinished volume in line to be defragmented.. Restricted groups policy settings control the list of members of groups and the groups to which the configured group belongs. You can restrict a group by following these steps:. 2.In the Properties dialog box, shown in Figure 5-10, note the current computer setting. If information about the purpose of the setting is available, you can view this information by tapping or clicking the Explain tab.. Windows supports scripts written as command-shell batch scripts ending with the.bat or.cmd extension or scripts that use the Windows Script Host (WSH). WSH is a feature of Windows Server that enables you to use scripts written in a scripting language, such as VBScript, without needing to insert the script into a webpage. To provide a multipurpose scripting environment, WSH relies on scripting engines. A scripting engine is the component that defines the core syntax and structure of a particular scripting language. Windows Server ships with scripting engines for VBScript and JScript. Other scripting engines are also available.. 3.Double-tap or double-click Allow Automatic Updates Immediate Installation. In the Properties dialog box, select Enabled, and then tap or click OK.. DHCP gives you centralized control over IP addressing and more. After DHCP is installed, you rely on the DHCP server to supply the basic information necessary for TCP/IP networking. This basic information can include the following: IP address, subnet mask, and default gateway; primary and secondary Domain Name System (DNS) servers; primary and secondary Windows Internet Name Service (WINS) servers; and the DNS domain name. DHCP servers can assign a dynamic IP version 4 (IPv4) address, a dynamic IP version 6 (IPv6) address, or both addresses to any of the network interface cards (NICs) on a computer.. After you generate keys, you create resource records for authenticated denial of existence by using either the more secure NSEC3 standard or the less secure NSEC standard. Because trust anchors are used to validate DNS responses, you also need to specify how trust anchors are updated and distributed. Typically, you’ll want to automatically update and distribute trust anchors. By default, records are signed with SHA-1 and SHA-256 encryption. You can select other encryption algorithms as well.. 4.On the Key Signing Key page, configure a KSK by tapping or clicking Add, accepting or changing the default values for key properties and rollover, and then tapping or clicking OK. When you are ready to continue, tap or click Next twice.. 2.Press and hold or right-click the subnet you want to update, and then tap or click New Pointer (PTR).. Setting the zone type. 2.Press and hold or right-click the server’s Printers node, and then tap or click Add Printer to start the Network Printer Installation Wizard.. Windows Server 2012 R2 provides separate processes for system state and full server recovery and the recovery of individual volumes and files and folders. You can use the Recovery Wizard in Windows Server Backup to recover nonsystem volumes and files and folders from a backup. Before you begin, you should be sure that the computer you are recovering files to is running Windows Server 2012 R2. If you want to recover individual files and folders, you should be sure that at least one backup exists on an internal or external disk or in a remote shared folder. You cannot recover files and folders from backups saved to DVDs or removable media..