Before you make a hard drive available to users, you need to configure it and consider how it will be used. With Windows Server 2012 R2, you can configure hard drives in a variety of ways. The technique you choose depends primarily on the type of data with which you’re working and the needs of your network environment. For general user data stored on workstations, you might want to configure individual drives as stand-alone storage devices. In that case, user data is stored on a workstation’s hard drive, where it can be accessed and stored locally.. ?FAT. In Server Manager, you can work with storage pools and allocate space by selecting the File And Storage Services node, and then selecting the related Storage Pools subnode. As Figure 2–7 shows, the Storage Pools subnode lists the available storage pools, the virtual disks created within storage pools, and the available physical disks. Keep in mind that what’s presented as physical disks might actually be LUNs (virtual disks) from a storage subsystem.. ?Using shadow copies. 4.Public folder sharing controls access to a computer’s Public folder. To configure public folder sharing, expand the All Networks panel by tapping or clicking the related expand button. On the Public Folder Sharing panel, choose one of the following options:. For application throughout a domain, a claims-based policy should be enabled for all domain controllers in a domain to ensure consistent application. Because of this, you typically enable and configure this policy through the Default Domain Controllers Group Policy Object (GPO), or the highest GPO linked to the domain controllers organizational unit (OU).. 4.Tap or click OK. The Add Object dialog box is displayed. To ensure that permissions on the path are not replaced, select Do Not Allow Permissions On This File Or Folder To Be Replaced, and then tap or click OK. Skip the remaining steps in this procedure.. 3.Double-tap or double-click the Windows Settings folder in the User. In Group Policy, you’ll find network management policies for both wired networks (IEEE 802.3) and wireless networks (IEEE 802.11) are located in the Administrative Templates for Computer Configuration under Windows Settings\Security Settings. Only one wired policy and one wireless policy can be created and applied at a time. This means you can establish both a wired policy and a wireless policy for computers running Windows Vista and later releases of Windows. You also can create a wireless policy for computers running Windows XP.. ?If the M and O flags are both set to 1, DHCPv6 is used for both IP addressing and other configuration settings. This combination is known asDHCPv6 stateful mode, in which DHCPv6 assigns stateful addresses to IPv6 clients.. NOTEOnly servers running Windows Server 2012 R2 and that have been added for management in Server Manager are listed.. After you create at least one normal or multicast IPv4 scope, you can create a superscope by following these steps:. Scope options enable you to precisely control a scope’s functioning and to set default TCP/IP settings for clients that use the scope. For example, you can use scope options to enable clients to automatically find DNS servers on the network. You can also define settings for default gateways, WINS, and more. Scope options apply only to normal scopes, not to multicast scopes.. 2.In the Reservation text box, enter a short but descriptive name for the reservation. This information is used only for identification purposes.. ?Create one or more threads to load the zones that are stored in AD DS..